XM Plural-Component Sprayers
Discover the next evolution in plural-component spraying
High-pressure equipment for protective coatings
Precise ratio assurance in a fully configurable system
Engineered to handle the toughest protective coatings, the Graco XM Plural-Component Sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.
At the heart of the ratio control is Graco's advanced dosing technology. The major component is constantly flowing while the minor component is injected at higher pressures. Advanced sensing technology allows pumps to compensate for pressure fluctuations, resulting in accurate, on-ratio mixing for better yield and less waste.
Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job. Start with a base unit. Then select the accessories you need. You get exactly what you need. No more. No less.
FEATURES
- Advanced, intuitive user controls provide real-time display of ratio
- USB port lets you easily access and download historical spraying data
- Supports multiple spray guns for added productivity
- Allows for easy crane transport with eye hooks on air motors
- Variable ratio system - handles material ratios from 1:1 to 10:1
Technical Specifications & Configurable Options
Technical Specifications
- Dimensions
- Base Unit (no hoppers) 39W x 70H x 38D in (99 x 178 x 97 cm)
- Side mounted hoppers 99W x 70H x 38D in (252 x 178 x 97 cm)
- Rear mounted hoppers 57W x 70H x 65D in (145 x 178 x 165 cm)
- Mix ratio range 1:1 to 10:1 (in 0.1 increments)
- Ratio tolerance range +/- 5%
- Fluid filtration 60 mesh (238 micron standard)
(not included on some models) - Flow rates
- Minimum 1 qt/min (0.95 lpm)*
- Maximum 3 gpm (11.4 lpm)*
*Actual flow rates vary by material type
- Air inlet 3/4 npt (f)
- Fluid inlets without feed kits 1-1/4 npt (m)
- Max mixed fluid working pressure
- 50:1 5200 psi (358 bar, 35.8 MPa)
- 70:16300 psi (434 bar, 43.4 MPa)
- Air supply pressure range50-150 psi (3.5 to 10.3 bar, 0.35 to 1.0 MPa)
- Max pump air set pressure
- 50:1 100 psi (7.0 bar, 0.7 MPa)
- 70:1 90 psi (6.2 bar, 0.62 MPa)
- Max pump inlet fluid pressure 250 psi (17 bar, 1.7 MPa)
- Max air consumption at 100 psi (0.7 MPa, 7.0 bar) 70 scfm/gpm (1.96 m3 /min/lpm)
- Ambient temperature range
- Operating .32° to 130°F (0° to 54°C)
- Storage 30° to 160°F (-1° to 71°C)
- Weight
- Base machine 742 lb (337 kg)
(No heaters, hoppers or junction box) - Fully configured 1550 lb (703 kg)
(Includes heated hoppers, feed pumps, heaters and junction box
- Base machine 742 lb (337 kg)
- Sound pressure 86 dBA at 100 psi (7.0 bar, 0.7 MPa)
- Fluid viscosity range200-20,000 cps
(heavier viscosities can be sprayed using heat, recirculation and/or pressure feeding - Wetted parts
- Suction tubesAluminum
- Flush pumpStainless steel, aluminum, carbide,
UHMWPE and PTFE - HosesNylon
- Pumps (A and B)Carbon steel, alloy steel, 303, 440, 17-ph grades
stainless steel, zinc and nickel plating, ductile iron,
tungsten carbide, and PTFE - Metering valvesCarbon steel, nickel plating, carbide, polyethylene, leather
- ManifoldCarbon steel, nickel plating, carbide, 302 stainless steel,
PTFE, UHMWPE - MixerStainless steel housing with acetal elements
- Spray gun Stainless steel, acetal, polyethylene, nylon,
polypropylene, carbide, polyurethane, solvent-resistant o-rings
Configurable options loaded with features
Hoppers
20-gal (76 l) hoppers are:
- Jacketed for heated water or oil
- Made of rugged, double-wall polyethylene
- Available in heated* or standard
7-gal (26 l) hoppers are:
- Excellent for high ratio applications
Viscon Fluid Heater*
- 240 VAC, 4000 watts
- Other voltage options sold separately
Transfer Pumps*
- Feeds material to main pumps
- Recommended for highly viscous materials
- Easily mounts to 20-gal (76 l) hoppers or drums
- Choose Graco T2 or Monark 5:1 transfer pump
Twistork Agitators
- Helps maintain proper material consistency
- Easily mounts on 20-gal (76 l) hoppers or drums
- Approved for use in explosive atmospheres
Ordering Information
PART NUMBER
Model | Base Unit | Power/Heat | Supply |
---|---|---|---|
XM |
BASE UNIT CHOICES
Base Unit: (Third Digit) | XM Model (hose/gun) (Mpa, bar) | Pump Filters | Remote Manifold | A Lower* | B Lower* |
---|---|---|---|---|---|
1 | XM50 | X | L250C4 | L220C4 | |
2 | XM50 | L250C3 | L220C3 | ||
3 | XM70 | X | L180C4 | L145C4 | |
4 | XM70 | L180C3 | L145C3 | ||
5 | XM50 | X | X | L250C4 | L220C4 |
6 | XM50 | X | L250C3 | L220C3 | |
7 | XM70 | X | X | L180C4 | L180C4 |
8 | XM70 | X | L180C3 | L145C3 |
*For Lowers, see Manual 311762
POWER AND PRIMARY HEATER CHOICES
Power/Heat: (Fourth Digit) | Control Box | Fluid Heaters | Junction Box | Location Category | Approvals |
---|---|---|---|---|---|
A | Wall power supply | NE | CE, FM, FMc | ||
B | Wall power supply | X | X | NE | CE, FM, FMc |
C | Wall power supply | X | NE | CE, FM, FMc | |
D | IS/ Alternator | EH | CE, FM, FMc, Ex | ||
E | IS/ Alternator | X | EH | CE, FM, FMc, Ex |
Base Unit Includes:
- Frame
- Flush pump
- Dosing valves
- Mix manifold
- Controls
- USB port
- Xtreme Pumps
- Xtreme-Duty Hose
- Two static mixers
- XTR Gun
- Your choice of power supply
- Recirculation kit
Airless Guns
Water Jacketed Heated Hoses - 50 ft (15.2 m), C Series, water-heated hose
XTR500
One inch round handle, four-finger trigger, no tip
XTR501
One inch round handle, four-finger trigger, 519 flat tip
XTR502
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
XTR503
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
XTR504
One inch round handle, four-finger trigger, 519 XHD RAC tip
XTR505
One inch round handle, two-finger trigger, 519 XHD RAC tip
XTR-7 Airless Spray Gun - Maximum working pressure: 7250 psi (500 bar, 50.0 MPa
XTR700
Round handle, four-finger trigger, no tip
XTR701
Round handle, four-finger trigger, 519 flat tip
XTR702
Oval-insulated handle, four-finger trigger, 519 XHD RAC tip
XTR703
Oval-insulated handle, two-finger trigger, 519 XHD RAC tip
XTR704
Round handle, four-finger trigger, 519 XHD RAC tip
XTR705
Round handle, two-finger trigger, 519 XHD RAC tip
XHF Airless Spray Gun - Maximum working pressure: 7250 psi (500 bar, 50.0 MPa
262854
High-flow, high-pressure gun, four-finger trigger, 429 XHD RAC tip
Heated Hoses
Water Jacketed Heated Hoses - 50 ft (15.2 m), C Series, water-heated hose
24M440
3/8 in x 1/4 in (9.53 mm x 6.35 mm) 5000 psi (345 bar, 34.5 MPa)
24M441
3/8 in x 3/8 in (9.53 mm) 5000 psi (345 bar, 34.5 MPa)
24M442
1/2 in x 1/4 in (13 mm x 6.35 mm) 5000 psi (345 bar, 34.5 MPa)
24M443
1/2 in x 3/8 in (13 mm x 9.53 mm) 5000 psi (345 bar, 34.5 MPa)
24M444
1/2 in x 1/2 in (13 mm) 5000 psi (345 bar, 34.5 MPa)
248118
1/2 in x 1/2 in (13 mm) 7250 psi (500 bar, 50 MPa)
248119
3/8 in x 3/8 in (9.53 mm) 7250 psi (500 bar, 50 MPa)
248120
1/2 in x 3/8 in (13 mm x 9.53 mm) 7250 psi (500 bar, 50 MPa)
248121
3/8 in x 1/4 in (9.53 mm x 6.35 mm) 7250 psi (500 bar, 50 MPa)
24M439
1/2 in x 1/4 in (13 mm x 6.35 mm) 7250 psi (500 bar, 50 MPa)
Electrically Heated Hoses - 50 ft (15.2 m), with FTS cable (see 309572 for hose fitting sizes and adapters)
248907
1/4 in x 3/8 in (6 mm x 10 mm) 5000 psi (345 bar, 34.5 MPa)
248908
3/8 in x 3/8 in (10 mm) 5000 psi (345 bar, 34.5 MPa)
262727
1/2 in x 1/4 in (13 mm x 5 mm) 5000 psi (345 bar, 34.5 MPa)
262728
1/2 in x 3/8 in (13 mm x 10 mm) 5000 psi (345 bar, 34.5 MPa)
262730
1/2 in x 1/2 in (13 mm) 5000 psi (345 bar, 34.5 MPa)
256876
Electric hose heat control kit. Includes XM mounting hardware
Accessories
Accessories Kits for XM50 and XM70
255963
20-gal (76 l) hopper (heat source not included)
256257
Hopper heater kit, 240 VAC
256273
Hopper/hose heat circulation kit (heater not included)
256259
20-gal (76 l) hopper mounting bracket kit
256170
Hopper fluid outlet kit
256980
Remote mix manifold conversion kit
256512
Desiccant kit (for 20-gal (76 l) hoppers)
262454
Desiccant kit (for 7-gal (26 l) hoppers)
256262
Caster kit
256263
Hose rack kit
256274
Twistork agitator kit
15F028
Band heater, drum, 1000 W, 230 VAC
256275
T2 2:1 feed pump kit
256276
Monark 5:1 feed pump kit
256232
Dual agitator & 2:1 drum feed pump kit
256255
Dual agitator & 5:1 drum feed pump kit
256260
7-gal (26 l) hopper installation kit, green
24N011
7-gal (26 l) hopper installation kit, blue
256653
Lower strainer and valve kit
256433
President™ 10:1 drum feed kit
256991
Alternator conversion kit
246477
Drum return tube/desiccant kit (requires fitting 159842)
Viscon HP Fluid Heaters - Compatible with Graco XM junction box
Approved for explosive atmospheres
245848
Hazardous location, 120 VAC, 2300 W, 19.2 amps
245862
Hazardous location, 200 VAC, 4000 W, 20 amps
245863
Hazardous location, 240 VAC, 4000 W, 16.7 amps
246254
Hazardous location, 380 VAC, 4000 W, 10.5 amps
245864
Hazardous location, 480 VAC, 4000 W, 8.3 amps
Viscon HP Fluid Heaters - Compatible with Graco XM junction box
Not approved for explosive atmospheres
245867
Non-hazardous location,120 VAC, 2300 W, 19.2 amps
245868
Non-hazardous location, 200 VAC, 4000 W, 20.0 amps
245869
Non-hazardous location, 240 VAC, 4000 W, 16.7 amps
246276
Non-hazardous location, 380 VAC, 4000 W, 10.5 amps
245870
Non-hazardous location, 480 VAC, 4000 W, 8.3 amps
Pump Lower Filter Screens
2-Pack | 25-Pack | Description |
---|---|---|
224458 | 238436 | 30 mesh (595 micron), 145cc, 180cc, 220cc, 250cc, 290cc |
224459 | 238438 | 60 mesh (290 micron), 145cc, 180cc, 220cc, 250cc, 290cc |
224468 | 238440 | 100 mesh (149 micron), 145cc, 180cc, 220cc, 250cc, 290cc |
Other Accessories
511352
Static mixer, 3/8 npt SST pipe, 12 SST element, 7250 psi
262478
Static mixer housing, 3/8 npt SST, 7250 psi. Uses plastic element below
246078
Scuff guard, 50 ft (15.2 m) braided polyethylene mesh
246456
Scuff guard, 50 ft (15.2 m) polyethylene bag
248927
Element mixer kit, plastic 12 element sticks, 25 pack
206995
Graco throat seal liquid (TSL), 1 qt (0.9 l)
206996
Graco throat seal liquid (TSL), 1 gal (3.8 l)
16T138
Scuff, Xtreme Wrap, removeable
262826
Gun splitter
24P834
Gun swivel, high-flow, 3/8 npsm x 1/2 in (F) for XHF gun