GRACO Electric Spray Foam Insulation Equipment

Reactor 2 E-30   

Click for the Reactor Brochure

Revolutionize the way you run your business


Each feature in the Reactor 2 was strategically designed to help your business, with innovations that help your operation run smoothly.  Software and hardware enhancements for better spray performance. And new technologies that add to your bottom line.

 

 

Reactor 2 E-30 gives you:

  • Compact footprint – more room in your spray rig
  • Ergonomic design – easier to service
  • Advanced circuit boards
  • Better spraying performance compared to traditional electric Reactor systems
  • Troubleshooting made quick and easy with QR codes

Graco InSite™ gives you:

  • Better control – manage your spray foam or polyurea business wherever you are
  • Better documentation – automatically collect job log data and spray parameters – lets you confirm the job was sprayed to specifications
  • Better fleet and crew management
  • Better cost containment and forecasting
  • Graco InSite comes standard on all Elite models of Reactor 2

 

Reactor 2 E-30i

Turnkey system for spray foam insulation - up to 30lbs/min.

The integrated series of Reactor 2 systems combines an electric proportioner and diesel generator into one package - an innovative, cost-saving design. In addition, the system offers the many advantages of the revolutionary Reactor 2 design.

 

 

 

Integrated design repurposes wasted heat and saves energy

  • System pulls the heat from the diesel engine to heat the A and B materials, reducing electrical demand on the generator
  • The system's smaller 20 kw generator uses less fuel than a standard 30 or 40 kw generator
  • You benefit from an annual fuel savings on average of $7,000 (actual savings may vary)

Reactor 2 advanced features can revolutionize the way you run your business

Each feature in the Reactor 2 was strategically designed to help your business, with innovations that help your operation run smoothly. Software and hardware enhancements for better spray performance. And new technologies that add to your bottom line.

  • Better control - with Graco InSite remote reporting, you can manage your spray foam or polyurea business wherever you are
  • Better documentation - collect job log data automatically and confirm you sprayed to specifications
  • Compact footprint - more room in your spray rig
  • Advanced controls with more visible information and tracking capabilitiy
  • Ergonomic design - easier maintenance and service
  • Better spraying performance compared to traditional electric Reactor systems
  • Advanced circuit boards - minimize pressure fluctuations
  • Better management of fleet, crew, cost containment and forecasting
  • Troubleshooting made quick and easy with QR codes
  • 3-year warranty on major electronic components
*Amps: Select 230V-1ph — 100; 230V-3ph — 62; or 400V-3ph — 35272111 (Bare)272011 (Bare)272112 (Bare)272012 (Bare)
ModelSPRAY FOAM EQUIPMENTPOLYUREA EQUIPMENT
Reactor 2 E-30 Elite Reactor 2 E-30 Reactor 2 E-XP2TM Elite Reactor 2 E-XP2TM
Graco InSite Yes No Yes No
Fluid Inlet Sensors Yes No Yes No
Max Working Pressure psi (Mpa, bar) 2000 (13.8, 138) 2000 (13.8, 138) 3500 (24.1, 241) 3500 (24.1, 241)

 

Ordering Information With 10 kW heater: With 10 kW heater:    
*Amps: Select 230V-1ph — 78; 230V-3ph — 50; or 400V-3ph — 34 272110 (Bare) 272010 (Bare)    
AP2110 (AP Pkg) AP2010 (AP Pkg)    
CS2110 (CS Pkg) CS2010 (CS Pkg)    
P22110 (P2 Pkg) P22010 (P2 Pkg)    
  With 15 kW heater: With 15 kW heater: With 15 kW heater: With 15 kW heater:
*Amps: Select 230V-1ph — 100; 230V-3ph — 62; or 400V-3ph — 35 AP2111 (AP Pkg) AP2011 (AP Pkg) AP2112 (AP Pkg) AP2012 (AP Pkg)
CS2111 (CS Pkg) CS2011 (CS Pkg)    
P22111 (P2 Pkg) P22011 (P2 Pkg) P22112 (P2 Pkg) P22012 (P2 Pkg)

 

Heated hose, 50 ft (15 m) 24Y240 24K240 24Y241 24K241
Heated hose, 10 ft (3 m) 246050 246050 246055 246055
Fusion® AP Gun 246102 246102 246101 246101
Fusion CS Gun CS02RD CS02RD no no
Probler® P2 GCP2R2 GCP2R2 GCP2R1 GCP2R1

 

Max Hose Length 310 ft (94 m) 310 ft (94 m) 310 ft (94 m) 310 ft (94 m)
Max Fluid Temp 190°F (88°C) 190°F (88°C) 190°F (88°C) 190°F (88°C)
Output 30 lb (13.6 kg)/min) 30 lb (13.6 kg)/min) 2.0 gpm (7.6 lpm) 2.0 gpm (7.6 lpm)
Weight 355 lb (161 kg) 355 lb (161 kg) 350 lb (159 kg) 350 lb (159 kg)
Operation manual 333023 333023 333023 333023
Repair manual 333024 333024 333024 333024

*Each model can be wired for all voltages: 230V-1ph; 230V-3ph; 400V-3ph

Integrated Systems

Ready for the jobsite or spray rig – right out of the box

A complete system for polyurethane foam or polyurea applications, the integrated series of Reactor systems combines an electric Reactor and a diesel generator into one package. Complete turnkey models are also available with an integrated air compressor

Look what the integrated system can do for you:

  • Saves diesel fuel costs – on average of $7,000 annually*
  • Improves productivity – with advanced, easy to use controls
  • Eliminates guesswork – the system is totally engineered and tested by Graco
  • Eliminates costly power issues – associated with shore power and low cost generators
  • Start spraying sooner – with improved heating capacity
  • Improves spray performance – with consistent pressure at the gun
  • Saves time – it’s easy to install into a spray rig since it’s prewired with components already selected and installed
  • Reduces fuel costs even more – compact, portable design fits into a smaller trailer and a smaller trailer means a smaller truck

Smaller generator saves fuel costs

The integrated series of Reactor Systems uses the heat from the diesel engine to heat the A and B materials. Depending on the model, this eliminates or significantly reduces the need for electrical heaters – reducing your fuel costs. Here’s how:

  • The system pulls heat from the engine to heat the A and B materials
  • Since there are no heaters (or only small heaters) on the equipment, this reduces the electrical demands of the generator, allowing a smaller generator to be used
  • The system’s smaller 22 kw generator uses less fuel than a standard 30 or 40 kw generator
  • You benefit from an annual fuel savings on average of $7,000*

* By replacing a standard 40 kw generator with a 20 kw generator, the system’s fuel needs are greatly reduced. Savings are an estimate only. Actual savings may vary

Operation Manual 332636
 NO AIR COMPRESSORWITH AIR COMPRESSOR
Model Reactor 2 E-30i Elite Reactor 2 E-30iTM Elite with heat Reactor 2 E-XP2i Elite with heat Reactor 2 E-30i Elite Reactor 2 E-30i Elite with heat Reactor 2 E-XP2iTM Elite with heat
Graco InSite Yes Yes Yes Yes Yes Yes
Max Working Pressure 2000 psi (138 bar, 13.8 MPa) 2000 psi (138 bar, 13.8 MPa) 3500 psi (240 bar, 24.0 MPa) 2000 psi (138 bar, 13.8 MPa) 2000 psi (138 bar, 13.8 MPa) 3500 psi (240 bar, 24.0 MPa)
Max Hose Length 310 ft (94 m) 310 ft (94 m) 310 ft (94 m) 310 ft (94 m) 310 ft (94 m) 310 ft (94 m)
Max Fluid Temperature 150°F (65°C) 190°F (87°C) 190°F (87°C) 150°F (65°C) 190°F (87°C) 190°F (87°C)
Max Output 30 lb (13.6 kg)/min 30 lb (13.6 kg)/min 2 gpm (7.6 lpm) 30 lb (13.6 kg)/min 30 lb (13.6 kg)/min 2 gpm (7.6 lpm)
Weight 1750 lb (794 kg) 1800 lb (816 kg) 1800 lb (816 kg) 2200 lb (998 kg) 2250 lb (1021 kg) 2200 lb (998 kg)
Heater Wattage NA 4000 W 4000 W NA 4000 W 4000 W
Auxiliary Power Available † 52 amps @ 240V 35 amps @ 240V 35 amps @ 240V 22 amps @ 240V 5 amps @ 240V 5 amps @ 240V
Auxiliary Power 120V or 240V, 1-ph 120V or 240V, 1-ph
Compressor NA NA NA Hydrovane 5 HP, 16 cfm, 240V, 1-ph, 60 Hz
Air Dryer NA NA NA Hankison refrigerated 22 scfm, 115V, 1-ph, 60 Hz
Engine Perkins 404-22G, 2.2 L, 29 HP Perkins 404-22G, 2.2 L, 29 HP
Generator Mecc Alte 22 kW, 240V, 1-ph, 60 Hz, pancake style Mecc Alte 22 kW, 240V, 1-ph, 60 Hz, pancake style
Ordering Information:  
Base Machine 272079 272080 272081 272089 272090 272091
Gun Options Fusion® AP Pkg AP2079 (246102 gun) AP2080 (246102 gun) AP2081 (246101 gun) AP2089 (246102 gun) AP2090 (246102 gun) AP2091 (246101 gun)
Fusion CS Pkg CS2079 (CS02RD gun) CS2080 (CS02RD gun) NA CS2089 (CS02RD gun) CS2090 (CS02RD gun) NA
P2 Pkg P22079 (GCP2R2 gun) P22080 (GCP2R2 gun) P22081 (GCP2R1 gun) P22089 (GCP2R2 gun) P22090 (GCP2R2 gun) P22091 (GCP2R1 gun)
Repair Manual 332636 332636 332636 332636 332636 332636

*Packages include spray hose, whip hose and gun**Packages with Remote Display also include kit part number 24K338

† Available auxiliary current will be less when the engine is de-rated for site altitude. Reduce the available auxiliary current by 2.5 amps per 1000 ft (300 m) elevation increments. If the available auxiliary current is less than zero, the system configuration may not support the full load at that altitude.

Reactor Accessories

Graco InSite Remote Reporting Technology

24T280

Graco InSite Retrofit Kit. Compatible with the following Reactor 2 models: E-30, E-XP2.

24T278

Graco InSite Retrofit Kit. Compatible with the following Reactor models: E-20TM, E-30, E-XP1TM, E-XP2, H-25TM, H-40TM, H-50TM, H-XP2TM and H-XP3TM

24T279

Graco InSite Retrofit Kit. Compatible with the following first generation integrated Reactor models: E-30i, E-XP2i.

16X521

Extension cable, 25 ft (7.5 m)

Hoses and Hose Accessories

Protect your hoses with Xtreme-Wrap Scuff Guard. For all Reactor 2 models.

24T243

10 ft (3 m) Wrap Kit

24T244

50 ft (15 m) Wrap Kit

24Y240

3/8 in x 50 ft (9.5 mm x 15 m) Hose, 2000 psi (138 bar, 13.8 MPa) with RTD and Xtreme-Wrap Scuff Guard

24Y241

3/8 in x 50 ft (9.5 mm x 15 m) Hose, 3500 psi (240 bar, 24.0 MPa) with RTD and Xtreme-Wrap Scuff Guard

24K240

3/8 in x 50 ft (9.5 mm x 15 m) Hose, 2000 psi (138 bar, 13.8 MPa) with RTD, w/ Scuff Guard

24K241

3/8 in x 50 ft (9.5 mm x 15 m) Hose, 3500 psi (240 bar, 24.0 MPa) with RTD, w/ Scuff Guard

246050

1/4 in x 10 ft (6.3 mm x 3 m) Whip Hose, 2000 psi (138 bar, 13.8 MPa)

246055

1/4 in x 10 ft (6.3 mm x 3 m) Whip Hose, 3500 psi (240 bar, 24.0 MPa)

24N450

50 ft (15 m) RTD cable

24K207

Fluid Temperature Sensor with RTD

For list of all hose options, visit Graco.com

24K336

Hose Rack Kit. For integrated Reactor 2 systems. Supports 310 feet (94 m) of heated hose. (Some assembly required)

15V551

ADM Protective Covers, 10 pack

15M483

Remote Display Protective Covers, 10 pack

24U177

Feed Pump Shut Down Kit

24M174

Drum Level Dip Sticks, for standard 55-gal drums

For Reactor 2 stand-alone models

24U314

Wheel Kit, includes wheels, handle and brackets, Reactor 2 stand-alone only

24U315

Air Manifold Kit, Reactor 2 stand-alone only

For integrated Reactor 2 systems

24U176

Complete air compressor, refrigerated air dryer, frames, fastener and all electrical and air connections included. Assembly required.

24K333

Fuel Tank/Battery Move Kit

24K337

Light Tower Kit

24U181

Booster Heat Kit, to reach temperatures above 140°F (60°C)

Remote Display Kit 24U174

The convenience of having control at the gun. For both integrated and stand-alone Reactor 2 systems.

With a Remote Display*, your sprayer/operator can:

  • Adjust temperatures and pressures
  • Turn heat zones and motor on and off
  • View and clear alarms and warnings
  • Place pump in park mode
  • View drum level indicator
  • Communicate with ADM at the equipment

* Additional CAN cable required, hose bundles available

For more parts and accessories, see Graco Catalog 349104

Contact Us

Service & Training

Sign Up For Our Newsletter

Enter your email below to subscribe:

Our Suppliers: