Reactor A-XP1 Proportioner Package, Probler P2 Gun, 230/400 V P2Y164

In stock
SKU
P2Y164
$36,380.00
Quick Overview
The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite.

All in-stock items will ship within 5-7 days. Any items affected by continuing supply chain issues will receive notifications.

The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.

For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.

  • Maintains temperature setpoints for better yield
  • Maintains consistent output pressure for uniform spray pattern
  • Easy to operate and maintain
  • Best choice for affordability and durability
  • Three Heat Zones

    • Three independent heat zones – ISO, resin and hose heat
    • Provide accurate heat control for reliable spraying to handle different chemical viscosities
    • Digital temperature controls
  • Three Heat Zones

    • Three independent heat zones – ISO, resin and hose heat
    • Provide accurate heat control for reliable spraying to handle different chemical viscosities
    • Digital temperature controls
  • Recirculation Manifold

    • A quick, easy way to balance system pressures
  • NXT Air Motor

    • Low air consumption for increased efficiency
    • Muffler provides low operating noise levels
    • Air valve provides smooth and rapid changeover
  • ISO Pump Lube System

    • Prevents isocyanate crystallization on the pump seal and shaft
  • Hybrid Heater

    • Provides better temperature control
More Information
Hose Length (ft)50, 10
Air Inlet Size (in) 1/2
Component A Inlet Size (in) 3/4
Component B Inlet Size (in) 3/4
Maximum Air Consumption (SCFM) 32 scfm at 2000 psi
Maximum Air Inlet Pressure (psi)125
Maximum Fluid Temperature (\xc2\xb0F)190
Overall Depth (in)24.5
Overall Height (in)43.5
Overall Width (in)21.5
Weight (lb)310
Hose Length (m)15.24, 3.048
Air Inlet Size (cm)1.27
Air Inlet Size (mm)12.7
Component A Inlet Size (mm)19.05
Maximum Fluid Temperature (\xc2\xb0C)88
Overall Height (cm)110.5
Overall Height (mm)1105
Overall Depth (cm)62.2
Overall Depth (mm)622
Overall Width (cm)54.6
Overall Width (mm)546
Weight (kg)140.6
Maximum Flow Rate (L/min)5.68
Maximum Air Inlet Pressure (bar)8.62
Maximum Air Inlet Pressure (kPa)862
Component B Inlet Size (mm)19.05
TESTIMONIALS
Check Out Our Client’s Feedback

My experience was absolutely fantastic! I started shopping for a commercial grade paint sprayer. Bolair’s helped me find the best sprayer for a large project. They suggested a Titan sprayer and I am so happy with the choice. I have been using it for a year now, sorry for the late review but thank you! The price was absolutely fair and even the delivery was early. I highly recommend Bolair’s to anyone in the market for a sprayer!

Joseph Charbanak

Bolair team has a great knowledge of their products and are extremely helpful when it comes to needing information pertaining to either material or equipment. It is refreshing to know that when I have a question or am in need products, they always respond promptly with pricing as well as shipment. From the office staff to the outside sales team to the drivers, all work well to make my job easier.

Mabelle Drummond

I can't say enough good things about Bolair. The team of support is nothing short of amazing. They can answer any questions from pricing to installation and troubleshooting! I have them all in my speed dial because if im in a jam they are the first team to call besides God!

Elwin Victor

We've purchased our insulating materials at Bolair for several years. Always our first call. Good prices. Excellent customer service!

Tobin Grey
CONTACT US

Request a quote - No Purchase Necessary

Location: 17 Brownridge Road, Units 1 & 2
Halton Hills, Ontario L7G 0C6
Location: 9315 28 Ave NW
Edmonton, Alberta T6N 1N1
Location: #14-19889 96th Ave
Langley, BC V1M 3C7